Are you looking to get your wooden floors cleaned and polished? Do you know the steps that have to be followed while doing this? If you have any confusion, then get in touch with an expert immediately. In Brisbane, floor sanding and polishing is considered an intricate part to decorate the house. That is why you will find a lot of companies offering this service to the people. However, if you follow their procedure from the beginning, you will feel that you can also carry out the polishing and sanding on your own.
The first step in floor sanding and polishing is to clear the entire room including the carpet and its underlay as well. Many floors have staples and tacks to keep the floor polished for a long time. They should also be removed along with everything else. You will also have to check for any nails that are protruding from the surface. A hammer or a nail punch will be appropriate to get them out from below the surface. If the floor is being sanded for the first time, then it would be ideal to fill the nail holes after the initial sanding is being done.
If it has been sanded previously then the nail holes should have matching timber filler. Moreover, if the floor has been coated before, you will not have to pay attention to the leveling. When you are polishing the floor for the first time, it will be wise to get the floor leveled by a professional. They are the best people to understand the difference in level and would fix the issue in no time. The next step would be to seal all the doors and windows and taping plastic over the walls. The walls, doors and windows have to be protected against the dust of the sanding. When you start with the sanding process, you should always use a medium grit paper. This would help you make the surface even before starting with the larger sand paper. The machine has to be aligned diagonally across the floor. The machine is mainly used in this process to smooth any irregularities that may be present on the floor. Always try to go from one end of the wall to another. Going in a zigzag direction will affect the surface to a great extent while you start polishing. Furthermore, you will not be able to understand which part has been sanded properly and which part needs more sanding.
The fourth step will be diagonal sanding. But, you will have to apply less pressure during this part of the sanding process. In the next step, you will have to switch to the roller. These rollers have an extension handle fitted to their frame. Once you start rolling in the direction of the timber, you will notice a change in color of the wood. The wood will start to gloss all of a sudden. Applying two coats will be more than enough for your floor. If the floor is very old, then you can apply a third if you think that the polish is not enough. One of the best companies in this business is Apex Floors. You can get in touch with them for professional help.



